Water and sanitation is a critical function of society

Above ground and below ground. Pipes, building, instruments, electronics and equipment in the buildings risk being exposed to corrosion and bacterial growth if a proper moisture level in the air is not ensured.

Airwatergreen dehumidification technology is well suited for installations in sewage-related buildings. The dehumidifiers are built to withstand harsh environments with the right choice of materials and few moving parts. They are also just as energy efficient even at low temperatures. This makes it possible to have effective dehumidification in buildings that are at a lower temperature. And to reduce heating costs in buildings that are rarely visited. The dehumidifiers ensure a good climate without corrosion and mold formation.

For pumping stations we have a combination solution with a dehumidifier and a carbon filter included called Odorless Climate. This solution keeps the station dry and addresses challenges with hydrogen sulfide odor.

Airwatergreen products are very easy to install as they do not require the laying of ventilation pipes. Dry air and water are produced on site and all our products can be easily connected for monitoring.

Sewage treatment plants

Challenge: Large volumes and high moisture loads and a temperature that varies throughout the year.
Our solution:
REX with dehumidification capacity adapted to the moisture load. REX can be supplemented with special equipment for particularly harsh environments.

Pumping station

Challenge: Both the building and the equipment in the building are exposed to a continuous moisture load. Hydrogen sulphide is present in most pumping stations and is sometimes a nuisance to the environment.

Our solution: FLEX dehumidifiers that are easily installed even in smaller pumping stations. In very large pumping stations, even REX can also be used. Ability to reduce heating where possible to save energy – our dehumidifiers are just as effective at low temperatures. Set the required humidity level (RH) and let the dehumidifier create a good climate.
Combine the dehumidifier with our carbon filter to remove unpleasant odors!
Take advantage of the Tempguard function that allows the dehumidifier to act as a heater when the temperature drops below a defined level.

Pipe galleries

Challenge: Moisture challenges in underground spaces. Cold pipes have a high risk of condensation.
Our solution: FLEX dehumidifier that can be easily mounted on a wall. If the pipes are at a low temperature, we recommend using a dew point sensor for optimal control of dehumidification.

polymeric material

Challenge: Storage of chemicals that need a controlled moisture level.
Our solution: FLEX dehumidifier that can be easily wall-mounted. Set the desired moisture level and the dehumidifier will automatically control the set value.

Staff rooms and other spaces and storerooms

Challenge: It is important to have good ventilation, which in itself can constitute a moisture load during the summer months when the moisture in the outdoor air rises.

Our solution: Adapt the dehumidification capacity to the calculated and assessed moisture load. FLEX or REX. Adapt the need over time.