FLEX dehumidifiers
Works equally well in all temperatures.
An intelligent portable dehumidifier
FLEX is an intelligent portable dehumidifier based on Airwatergreen’s patented technology. It is an adsorption method that offers a number of unique advantages:
- Halved energy consumption compared to traditional technology
- Same efficiency at all temperatures – even in freezing conditions
- Same efficiency at all moisture levels from 10% – 100% RH
- Easy plug-n-play installation – without running unnecessary ventilation pipes
A reduction in heating costs
FLEX enables a reduction in heating costs without risking increasing humidity levels as it works just as efficiently at low temperatures. This allows you to reduce energy consumption in premises that are rarely used or do not need to be kept heated.
Installation is simple. All you need is a standard electricity connection (220V) and a way to take care of the water produced. FLEX is used in smaller spaces such as crawl spaces, attics, smaller premises up to 600m3 volume (small church).
For the remediation of moisture damage, FLEX is used because it is easy to carry on site. Equipped with connectivity, you can easily monitor the moisture level going down (see picture on the right) from your computer or mobile phone.
Dew point sensor for relative dew point control
FLEX can be set to work against a predefined level of relative humidity (RH) but can also be controlled by an external dew point sensor connected to FLEX, or follow the mold avoidance index (LIM).
These options optimize energy use by allowing the dehumidifier to focus on the critical parameters of the installation.
When the relative humidity level is reached, the dehumidifier pauses, but continuously senses humidity and temperature levels.
The dew point control uses an external sensor attached to the cold surface to avoid condensation which can lead to corrosion on e.g. cold surfaces/pipes.
Functions Temp Guard
The Temp Guard function is available for the FLEX Smart, Cloud and Integrate series. Temp Guard is used to ensure that the space is kept frost-free by acting as an element if a certain predefined temperature is passed. With the Temp Guard function activated, the dehumidifier alone creates an optimal climate at the lowest cost.
Pack up your flex dehumidifier
Your FLEX comes with a package of granules, a 3 m long hose with hose clamp, a manual and a Quick install manual for a quick and easy installation.
Technical data
4 models: Basic, Smart, Cloud, Integrate
Basic
All models are available in black or white color.
The specification of the Basic model is
- Temperature range: -20°C to +50°C
- Relative humidity (RH): 10% to 100%.
- Electrical connection: 230V 1-50Hz 10A
- Average consumption: <400W
- Enclosure: IP63
- Air flow rate: 400 m3/h
- Fuse: 10A
- Dimensions: 340 x 650 x 1060 mm
- Weight: 20kg
- Noise: 65 dB
- Standard filter: G4
Smart
All models are available in black or white color.
The specification of the Smart model is:
- Temperature range: -20°C to +50°C
- Relative humidity (RH): 20% to 100%.
- Electrical connection: 230V 1-50Hz 10A
- Average consumption: <400W
- Enclosure: IP63
- Air flow rate: 400 m3/h
- Fuse: 10A
- Dimensions: 340 x 650 x 1060 mm
- Weight: 20kg
- Noise: 65 dB
- Standard filter: G4
- Temp Guard: Yes – can be completed
The SMART model has extra functionality:
- Adjustable airflow
- Can be controlled via external sensor for dew point control
- Control against Mold Index Curve
Cloud
All models are available in black or white color.
The specification of the Cloud model is:
- Temperature range: -20°C to +50°C
- Relative humidity (RH): 10% to 100%.
- Electrical connection: 230V 1-50Hz 10A
- Average consumption: <400W
- Enclosure: IP63
- Air flow rate: 400 m3/h
- Fuse: 10A
- Dimensions: 340 x 650 x 1060 mm
- Weight: 20kg
- Noise: 65 dB
- Standard filter: G4
- Temp Guard: Yes – can be supplemented
The CLOUD model has extra functionality:
- Adjustable airflow
- Can be controlled via external sensor for dew point control
- Control against Mold Index Curve
- WIFI
Integrate
All models are available in black or white color.
- Temperature range: -20°C to +50°C
- Relative humidity (RH): 10% to 100%.
- Electrical connection: 230V 1-50Hz 10A
- Average consumption: <400W
- Enclosure: IP63
- Air flow rate: 400 m3/h
- Fuse: 10A
- Dimensions: 340 x 650 x 1060 mm
- Weight: 20kg
- Noise: 65 dB
- Standard filter: G4
- Temp Guard: Yes – can be supplemented
The Integrate model has extra functionality:
- Adjustable airflow
- Can be controlled via external sensor for dew point control
- Control against Mold Index Curve
- WIFI
- Modbus interface (configurable protocol)
FLEX accessories
There is a range of accessories designed for FLEX:
- The container cart, a container on wheels that collects water when no sewer is available. FLEX is placed on top and can also be easily moved with the trolley when needed. 40 liter capacity.
- Wall bracket, a bracket designed for mounting FLEX on a wall or similar.
- Filter kit, a kit containing granules of silica gel to replace the existing silica gel with after a certain time (see manual) to keep optimal performance. The kit also includes an air filter.
- Air filter, filters the air when passing through the dehumidifier
FLEX dehumidification capacity per temperature
This graph shows that the capacity of the dehumidifier is independent of humidity (10% – 100%RF) and is equally high down to 10 degrees C, and remains good down to below -10 degrees.
Dew point control
Do you have problems with condensation on cold surfaces?
See how our dew point control function will help you.
